Original
By certification 
PTFE EXTRUDED ROD
Molded PTFE Rod Features:
1. There are two kinds of PTFE rods to offer.
2. One is manufactured by paste extruding method in the diameter from 4 to 9mm and the other is made by ram extruding method is the diameter from 10mm to 50mm.
3. Over the diameter 50mm are manufactured by moulding.
4. PTFE is the most chemical-resistant of all known plastics.
5. It does not age.
6. PTFE has a wide range of practicable temperature from -180C to +260C and a wax-like surface 7. to which anything hardly sticks.
8. PTFE has the lowest coefficient of friction of all known solid materials.
9. It has the best electrical properties of all plastics.
Molded PTFE Rod Applications:
1. Electrical insulation, seal, antisticking materials. Molded PTFE Rod Material:
100% virgin PTFE, Recycle PTFE. As customer`s request.
Technical Datas:
| Diameter(mm) | Length(mm) | ||
| Nominal | Tolerance | Nominal | Tolerance |
| 4,5,6 | +0.48 |
100 |
+5.0 |
| 0 | |||
| 7,8,9 | +0.58 | ||
| 0 | |||
| 110,120,130 | +2.50 | ||
| 140,150 | 0 | ||
| 180,200,250 | +3.0 |
300 |
+2.0 |
| 270,300 | 0 | ||
Molded PTFE Rod Properties:
| Properties | Unit | Result |
| Apparent density | g/cm3 | 2.10—2.30 |
| Tensile strength (min) | MPa | 14 |
| Ultimate elongation (min) | % | 140 |
Note: When the diameter of rod is larger than 16mm.only test Apparent density
1. What is your MOQ?
MOQ may vary by customer's special requirement; we try our best to meet your business requirement.
2. What's your payment terms?
We normally do T/T, and we can also offer western union account for transfer money. And more flexible payment terms, welcome to have a discuss.
3. Can you provide samples?
Yes, we can offer samples, and some samples are free
4. Can you delivery by express?
Yes, we can delivery by any express.
5. When will the sample be ready?
Normally, the sample can be ready in 3 days.
